2018 Dragon Products, LTD Vacuum Trailers 120BBL

Every year there are new challenges and applications in the world of hauling. Dragon continually answers the call with its expansive line of innovative trailer products, from vacuum tanks to removable necks to container trailers. Customers go with the Dragon name because they know we understand their challenges, and that we have the engineering experience and production capacity to deliver the severe-duty equipment, service and support they need every time, everywhere.

Our full line of Vacuum Trailer are built in a variety of sizes and styles, and built to handle a variety of loads and needs. From Super Lightweight to Super Duty / Heavy Duty Vacuum Trailers, we have what you need to get the job done. And, as always, Dragon backs every product it manufactures with exceptional customer support.

• 120 Barrel DOT 407/412, ASME U" Stamp

• 35 PSI Internal, 15 PSI External, 53 PSIG Hydrostatic Test

• SHELL: 1/4 pl x 58 in o.d.

• HEAD: 1/4 pl asme f&d

• BAFFLE: 2 1/4 pl flat flanged and dished each with interior shell reinforcement ring

• STIFFENER: 3/8 x 2 1/2 rolled rings (9) external

• WELDS: internal root, external submerged-arc all welds solid

• COMPARTMENT: single

• LANDING LEGS: 2 speed, heavy duty, high capacity lift

• BUMPER: heavy duty per dot requirements FENDERS: full length formed hose pan (10 ga) with 1/4" formed supports each side of trailer.

• WALKWAY: installed on drivers side of trailer; full length grip strut walkway with formed pipe handrails rear access ladder, walkway support arm on each side of center

• TOOL BOX: (2ea) 18 x 18 x 36. (1ea) on each side with sealed door

• MUD FLAPS: anti sail

• VALVES: outlet 6" rear hydraulic operated clearflow lw-6000 valve. Inlet 4" rear hydraulic operated clearflow lw-4000 valve.

• RELIEFS: dot specification 407/412, 3" stainless steel relief valve, located at top front of barrel, 2" blow down line at rear 2" internal bleeder/ blow down line from front 12"manway ran to bottom external of tank.2" valve (resun model no.: d125) with remote handle to rear of trailer for operation.

• MANWAYS: four located on top. all asme 20" domed style with plated swing bolts and wing nuts

• SHUT OFF: ball type primary in front 12" manway with air operated isolation valve, ball type secondary 12 gal on drivers side front with drain over turn fully dot complainant as required

• PROTECTION: (pipe construction with longitudinal bracing)

• LEVEL GAUGE: ball float with ss ball located in rear head

• V/P GAUGE: 30-30 vacuum/pressure gauge

• INTERNAL LINING: bottom of tank internaly lined with stainless steel sheet 24"wide x 12ga(.105) thk. full length of tank.

• COATING: exterior surfaces white metal steel grit blast, 2.5 mil profile (sp-10), exterior coated high build epoxy primer and color coated with high solids polyurethane, 4-6 mil dry film thickness.

• PLACARDS: 4 placard frames

• FIRE EXTINGUISHER: 1 dry chemical for hydrocarbons

• ANTI STATIC CABLE: 1 static ground cable with clamp (50)