2018 Dragon Products, LTD Stimulation Equipment Mobile Blending Unit

Complete frac spread equipment and support in every shale play. From the toughest frac pumps and blending units to water transfer to the most advanced data control systems Dragon manufactures everything in house to ensure the highest quality. Plus we have parts and service centers located in every major North American hydrocarbon area, staffed with frac experts who know how to deploy our equipment to best fit your project. Whether you need the complete frac spread or the smallest water transfer pump Dragon has a solution.

Complete frac spread equipment and support in every shale play. From the toughest frac pumps and blending units to water transfer to the most advanced data control systems Dragon manufactures everything in house to ensure the highest quality. Plus we have parts and service centers located in every major North American hydrocarbon area, staffed with frac experts who know how to deploy our equipment to best fit your project. Whether you need the complete frac spread or the smallest water transfer pump Dragon has a solution.

The frac blender mobile blending unit is designed to integrate a slurry of water, sand, dry chemicals and liquid chemicals providing the desired fracturing components.

• Maximum working Fluid Rate: 100 BPM (4200 GPM)

• Maximum Discharge Pressure: 80-100PSI

• Maximum Concentration: 10.8 PSA (@ 100 BPM)

• Dimensions: (dimensions may change depending on chosen chassis)

• Length with sand hopper up: 43-3 (13.2m) down: 44-11 (13.7m)

• Width: 8-1 (2.5m) Height: 12-4 (3.8m) Weight: 55,000 lbs (24,950 kg)

• Steel rear dual axle fenders

• Front & Rear oil-field bumper with tow loops

• LED chassis lights and work lights

• Road motor 550Hp with FABCO Transfer case

• 375 HP John Deere deck engine with (4) Pad Funk Drive & 100 Gallon Fuel Tank

• Gorman-Rupp12 x 12 centrifugal pump (suction)

• 12 Suction Manifold with (12) 4 206 male subs

• 8 Turbine flow-meter on suction

• Mission 12 x 14 Centrifugal pump (Discharge)

• 12 Discharge Manifold with (12) 4 206 female Subs

• 10 MAG meter on discharge with pre-fabricated blank

• to add a 10 turbine flow-meter

• Electronic Controls (with Manual Back-up) with 3-turn Rheostats for Fine Tuning Flows

• Custom Valve Blocks

• Hydraulic Auger Positioning System

• Hydraulic oil cooler with 160 gal Hydraulic oil reservoir

• Load-Sense hydraulic pump Parker hoses

• 72 Mixing tub with impellor

• Dual 12 hydraulically driven sand augers

• Single 6 hydraulically driven sand auger

• Large in-feed hopper

• (2) Dry-add hoppers with 4 augers and jet mixers

• Chemical-Add System: (Optional)

• (2) 107 gal chemical tanks

• (8) Chemical pumps (0-10 GPM) w/flow-meters

• Transfer pump (0-10 GPM)

• Single operator enclosure with heating and AC

• Manual back-up hydraulic controls

• Full control and storage deck

• Air-actuated tub drain Aluminum control panel

• Engine start/stop/throttle

• Engine display modules with hours and fault codes